• English
  • Deutsch
  • Español
  • Français
  • Nederlands
No products in cart

SafeRing

SafeRing

SafeRing provides an aesthetically pleasing and inherently strong permanent alternative to conventional eyebolts as single point anchorages. It can be installed for use in aggressive external environments, internal locations such as office, industrial and commercial buildings, and can also be supplied with concealed access boxes for use in conjunction with raised access flooring.

SafeRing is available in a range of different finishes including galvanised steel, stainless steel, white nylon coated and special RAL colours to order.

  • Suitable for external and internal environments where there is a need for a single point anchorage.
  • Easy to install into suitable load bearing elements of the building.
  • Enables specifiers to comply with the guidelines for safe reach limits for window cleaners as contained within BS8213 Part 1: 1991.
  • Available in galvanised steel, stainless steel and white nylon coated as standard.
  • Can be supplied finished in special RAL colours to order.
  • Availability of concealed access for use in raised access flooring.

Installation

  • SafeRing should be installed by suitably trained and qualified personnel.
  • System design should ensure that an operative can always connect to the SafeRing from a position where they are not at risk of a fall.
  • SafeRing must only be fixed into a suitable load bearing element of the building. In general, brickwork parapets, infill panels and areas below windows are not suitable for fixed anchor points.
  • SafeRing should not be installed within 150 mm of any edge.

Testing / Maintenance

  • It is a legislative requirement that single point anchors are inspected and certified a minimum of once every 12 months by a suitably qualified person. Contact Latchways Sales Department for details of certified installers.

User Instructions

  • Only ever attach to the SafeRing system by means of a safety lanyard and full body harness in compliance with the appropriate legislative prequirements.
  • Ensure that the safety lanyard incorporates an energy absorber and is no more than 2.0 m long.
  • Ensure that the karabiner used to connect the lanyard to the SafeRing eyebolt is locked closed.
  • Do not use the SafeRing system as a primary means of support, to support partial or full body weight, or for abseiling.
  • Do not allow anyone to tamper with the SafeRing system when in use.
  • Further details are available in the user instructions.

For further information on any aspect of ManSafe for Window Maintenance including full istallation and inspection instructions contact Latchways.

SafeRing the aesthetically pleasing fixed eyebolt provides fall protection from within the building

PushLock or SafeRing Call Back

SafeRing available in a range of finishes